How To Set Default Hard Drive Windows 10

Main purposes of replacing hard drive in Windows 10/11

Actually, in that location are many users looking to supervene upon the hard drive in Windows 10/xi computer for 1 or more than reasons such as:

i. Replace bad/broken hard drive in Windows ten
Your current difficult bulldoze may have experienced a hardware failure and need to be replaced with a new one. Here is a case:
"I have a Dell XPS15 that was running Windows 10 simply the hard drive has failed completely and needs replacing. How do I go well-nigh installing and activating Windows 10 on a replacement difficult drive?"

2. Upgrade difficult drive to a larger hard drive for more chapters
As fourth dimension goes past, yous will detect that your hard drive is running slower and slower, and the C: drive is full, even the whole hard bulldoze is lack of space. Thus, you need to upgrade hard bulldoze with a larger one for storing more information.

3. Upgrade hard bulldoze to SSD for faster write/read speed
Part of users would like to increase PC or OS running speed by upgrading difficult drive to a faster SSD (solid-state drive). That'southward because SSD has better properties - it is more stable and more than faster than traditional HDD.

...

How to supplant hard drive without reinstalling Windows ten/11?

To replace hard drive Windows 10/11, one of the most widely-used methods is to do a fresh make clean install of Windows 10/11 on the new hard drive. But that requires you to reinstall other programs and applications likewise. The whole procedure will be quite complicated and time-consuming.

So in club to replace or upgrade difficult drive in Windows 10/11 without reinstalling Windows and apps, y'all had amend try other dissimilar methods. Beneath are two different means of replacing main hard drive on Windows 10/11 without reinstalling everything once over again. Check them out so choose one based on your needs.

Method i. Using Windows 10 /11native backup application

Windows ten/11 users know that Windows 10/xi does include a legacy backup application. And y'all tin can apply information technology to backup and restore system, then that you lot can replace hard drive Windows 10/11 without reinstallation.

※Precaution : Insert an empty USB with enough storage to hold Windows .

Pace 1. Printing Windows + R keys simultaneously, type Control Console. Under Organisation and Security, click Backup and Restore (Windows 7). And so, you lot will get into Backup and Restore utility. Here you should click on Create a system image.

Step 2. Hither you can first to create a system image. You will be asked "where practice you want to relieve the backup". Choose the just inserted USB drive, and click Side by side.

Step 3. In one case the backup completes, it volition brandish a message request if yous want to create a organization repair disk. And indeed, y'all will need the arrangement repair disk in gild to reimage the reckoner. Thus, yous need to follow the hints to create a organisation repair disk.

When you finished creating system repair disk, disconnect the power from the PC to complete the new hard drive installation. Later you lot correctly installed your new hard bulldoze, follow the steps below to restore the system fill-in to the new disk for replacing the old difficult drive in Windows 10/11.

Footstep i. Restart your Windows 10/eleven PC and boot from the system repair disk (USB drive).

Step 2. It will launch Windows Setup, click Next -> Repair Your Figurer.

Step iii. When yous go into a blue screen, choose Troubleshoot>System Paradigm to launch Organisation Image Recovery wizard. Tick Use the latest available organization image and and then click Next。.

Step 4. Cull the option to format and repartition difficult disk. Then click Next > Finish > Yes to start to restore the system prototype to the new hd.

Afterwards all the operation, your figurer volition be reimaged. This way is kinda complex for Windows users peculiarly for beginners. But fortunately, here we provide y'all another solution to replacing hard drive on Windows 10/11 more easily and conveniently.

Method 2. Using 3rd-party segmentation manager software

It is no incertitude that using the third party software tin can save a lot of trouble sometimes. If yous want to replace failing arrangement hard drive, or upgrade hard drive without whatever information loss or reinstalling everything on the current hard drive, you can use AOMEI Partition Banana Professional person.

This professional software tin assist you replace hard drive on Windows 11/10/viii/vii without reinstalling Bone and inside applications by cloning the difficult disk. Moreover, you can boot your estimator from the destination difficult bulldoze after clone. Here are the detailed steps on how to clone the system hard deejay for hard drive replacement.

★Preliminary work:

 Connect the new hard disk to the computer via USB port and make sure it is recognized successfully.

 Ensure the difficult deejay has enough space to hold all data from the current hard drive. if not, you can delete or remove unnecessary programs or files on the original disk in accelerate.

 Check out the partition fashion of the old and new hard disk (MBR or GPT). If the partition style of the new deejay is different from the old one, y'all tin can catechumen it to GPT or MBR beforehand. Or change boot fashion (BIOS or UEFI) after clone.

 In that location is a Demo version for costless download and trial.

Stride ane. Install AOMEI Partition Assistant Professional and run the program. In the principal interface, y'all'll see all disks on your figurer. For replacing hard drive on Windows 10/eleven, you lot tin can click All Tools -> Disk Clone Wizard.

Footstep ii. When you get into Disk Clone Wizard, you demand to select disk re-create method. Here nosotros cull Clone Deejay Quickly.

✍ AOMEI Partitioning Assistant provides two disk clone methods:
● Clone Disk Quickly: only copy the used space of the disk to some other disk, and y'all can clone large difficult bulldoze to smaller hard drive, and adjust partition size during the copy progress.
● Sector-by-Sector Clone: copy all sectors of the disk to a target disk no matter it is used or not. Information technology will make an exactly same deejay every bit the source disk.

Stride 3. Here, select the system disk every bit the source disk. Click Next.

Footstep 4. Select the new HDD or SSD as the target disk. Click Next. The operation will delete all information on the target hard bulldoze, and then if there is whatever important data on the deejay, click No and fill-in disk in advanced. If no, click Yep to continue.

* If the target disk is an SSD, you'd better cheque the option of "Optimize the performance of SSD".

Footstep 5. Here you can edit the partition size on the target disk according to your needs. Or you can repartition hard drive with AOMEI Sectionalization Assistant after coping. Click Next.

Step vi. Information technology volition give yous a Note about how to kick computer afterward clone or migration. Read information technology and click Finish.

Step 7. Finally, click Apply at the toolbar and click Proceed to execute the chore.

After cloning everything from the old hard bulldoze to the new one, y'all can close downward the computer and install the new disk for replacement.

For desktop, it is easy to install a second hard drive because information technology is commonly equipped with more than i hard drive bay. Afterward installation, yous demand to enter BIOS to change boot priority, and movement the cloned hard disk on the top ane of the kick order.

But if yous are replacing hard drive in Windows 10/11 laptop, things might become different as some laptop but one hard drive bay. In this instance, you demand to: Plow off your PC. Open the case, remove the old deejay and put in the new hard drive, attach the cables and secure the drive with screws. Clone the instance, turn on the power and it will kick from the cloned hard drive.

Determination

Compared with ii different ways, you may find that using AOMEI Division Assistant Professional to replace hard drive on Windows 10/11 laptop or desktop is much easier than using Windows 10/xi fill-in application.

Actually, AOMEI Partition Banana can not only allow you to copy entire hard bulldoze from one to another, but also allow you to drift Bone only. And it has many other advanced features that tin make up the shortages of Windows Disk Management including converting disk betwixt MBR and GPT without deleting volumes, allocating gratis infinite from 1 partition to another, splitting a big sectionalisation into two smaller ones.

What's more, Windows Server users tin attempt AOMEI Partition Assistant Server Edition.

Source: https://www.diskpart.com/windows-10/replacing-hard-drive-windows-10-4125.html

Share this post